Yes, the tether straps must always be used when installing it with ISOFIX.

Yes, it is completely safe to use our side impact protection even if it touches the car door, provided that the door can still easily be closed without using excessive force.

We at Axkid recommend as small an inclination of the car seat as possible, provided that the child can sit upright by itself without the head falling forward. All children are different and the inclination of the car seat must always be adapted to the child’s needs. The recommended angle for small children is about 30-35 degrees. A suitable angle for older children is between 15-25 degrees. Depending on the car seat model, there are different numbers of tilt positions and if you feel that you need more tilt than what the tilt control offers, you can buy a tilt wedge from one of our retailers » or at www.axkid.com »

Here is a video of how the wedge should be used.
https://www.youtube.com/watch?v=3FRZucidWE0

All our car seats have tilt functions in the front. Try to use these first to get a better angle on the car seat, see the user manual for detailed information. If you need to tilt the car seat even more, we recommend our accessory “angle adjusting wedge“.

Here is a video of how the wedge should be used.
https://www.youtube.com/watch?v=3FRZucidWE0

When you purchase your Axkid car seat, additional tether straps are always included to enable installation in all cars, with or without attachment loops. For Axkid Move however, there is an exception since the tether straps on the seat are different and can be attached to any car directly without the use of additional tether straps. For more detailed installation instructions please click here »

Yes, you can use our car seats on all seat positions if the car manufacturer approves them. Check the car’s user manual for more information on which seat positions is approved for use of a car seat or see our vehicle list here ».

We have a range of installation videos and instructions on our website. Click here »

When installing the car seat you can place it either with the heel on top of the car seat, or with the heel outside of the edge of the car seat. There is a mark on the heel that indicates how far out on the seat it can be installed. For more detailed installation instructions please click here »

Yes, they are compatible, unless any of the products are older than 8 years. If that is the case, we recommend that you recycle the seat and/or the base.

Yes, you can. Make sure that when you install the car seat it does not touch the seat in front of it. Once you have finished installing it, you can push back the seat in front and let it touch your car seat. Also make sure that you use the support leg correctly when installing the seat. Be very careful if you have an electrically powered car seat in front since the motors is very strong and can damage the Axkid seat.