Installation of Up

Begin by pushing out the ISOFIX arms from the base of the car seat. These will be used to connect the seat to the vehicle’s ISOFIX anchorage points.

Axkid Up features a unique support leg for added stability. Fold it down so it’s ready for adjustment once the seat is in place.

Place the folded-up booster seat onto the vehicle seat. Align the ISOFIX arms with the car’s ISOFIX connectors. Push the seat back firmly until you hear a click that confirms the arms are properly connected.

Pull the seat’s backrest all the way back so it aligns with the vehicle seat. This sets the booster into its forward-facing position.

Unlock the support leg and extend it fully until it rests firmly against the vehicle floor. This adds crucial stability to the installation.

Lift the seat fabric in the sitting area to access the height adjustment lever. Pull the handle and set the booster seat to your preferred height. Then close the lid and fold the fabric back into place.

Align the ASIP unit sideways with the mounting point, then turn it upright until it clicks into place. This provides extra protection in the event of a side collision.

You can further adjust the backrest to match your child’s height for optimal head and shoulder protection.
The side wings can also be removed for added space or comfort, depending on your child’s needs.

Place your child in the booster seat and fasten the car’s seat belt. Ensure the belt runs close over the child’s thighs and lies comfortably across the shoulder—not the neck. Always check that the belt is positioned properly before each journey.